Solar water heaters use the heat of the sun to heat up the water, which can save a lot of electricity bills in the home. Therefore, solar water heaters are used in many households. Under long-term use, the water heaters in the solar water heaters must produce scale, which is very influential. Efficiency and threats to our health. So you need to use solar water heater descaling agent , then how to use solar water heater descaling agent? The following decoration home network Xiaobian will take everyone to see the solar water heater cleaning method!
Why do solar water heaters need to be descaled?
If it is in the case of excessive scale, such long-term use will lead to deterioration of water quality and directly affect our human health. Long-term non-cleaning will result in turbid water quality, low water temperature and shortened life of solar water heaters. If it is not cleaned regularly, the solar water heater will shorten its life, reduce its use value, not fully play its role, and will bring you unnecessary troubles - such as bursting, water leakage and so on. These scales contain many kinds of chemical components, and if they are not cleaned regularly, the accumulated scale of the long-term deposit will increase the harmful substances in the water and may lead to skin allergies.
Solar water heater descaling agent cleaning method
First, the use of detergent
1. First open the water inlet of the solar water heater.
2. Add the solar water heater descaling agent to the storage tank.
3. Start the automatic thermal cycle function for 20-30 minutes, so that the detergent solution is in full contact with all parts of the water heater.
4. Next you can open the drain and drain the cleaning solution.
5. Refill the tank for two minutes after filling it with water.
6. Drain the circulating water and clean the descaling work.
Second, open the cleaning
1. It is best to clean the water heater when the water temperature and water level in the bucket are low, first drain the water in the water heater.
2. Wipe the glass tube clean.
3. Hold the glass tube with both hands and turn it clockwise and counterclockwise to loosen the glass tube.
4. After the glass tube is loose, insert the glass tube into the bucket for a period of time, and then let the glass tube out of the base, then slowly pull the glass tube out of the bucket.
5. Pour out all the water in the glass tube to check the scale. If there is more scale, pour the clean tap water into the water pipe, pour the water and pour it out. After repeated several times, wait for the water in the glass tube and then put the glass. The tube is reinstalled.
6. Clean all the glass tubes in the same way.
The above is the introduction of solar water heater descaling agent brought to you by the decoration home network Xiaobian, I hope to bring some help to everyone, I wonder if everyone is satisfied with the introduction of Xiaobian? If you still need more information, please continue to pay attention to our home encyclopedia!
More related wonderful reading:
Is the solar water heater descaling agent easy to use? How to use?
Soundproof Home Learning Zone,Portable Office Pod,Independent Modern Soundproof Booth,Easy Assemble Soundproof Booth
Guangzhou Mingli Intelligent Equipment Co.,Ltd , https://www.minglibooth.com