[ Chinese wardrobe net ] installation method of cloth wardrobe - the first to install the bottom
First install the bottom one, take out the four-way joint with the bottom and the high, and connect with the short tube in the middle. Install a four-way joint on each side, then install the tube on both sides, decide the position of the place, and install the long tube. Short tube. Then install the base fabric on both sides, and then install a three-way joint around each other.
Cloth wardrobe installation method - wardrobe cover
After installing the bottom, insert six short steel pipes, then put the whole wardrobe cloth up against the surrounding holes. Then install a layer of the bottom plate and then put it on the six steel pipes.
Cloth wardrobe installation method - floor and steel pipe
If the wardrobe is divided on two sides, first install the short-side floor, first insert the side steel pipe, then install the cloth, then connect the four-way joint, then install two horizontal steel pipes, then install the cloth, then Then make up the four-way connector on both sides. Repeat the baffle until it is attached to the top.
After the short-side partition is installed, the long side is a vertical hanging area, and a three-way joint is used to connect the two long tubes to the top.
After both sides are installed, connect them directly with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high and not enough to squeeze, it is recommended to push the side back so as not to be installed. At the same time, the hanging steel pipe can also be installed with a hook type joint, which is relatively simple.
Cloth wardrobe installation method - wardrobe cover
When the top of the big set is at the top, it is best to pull the bottom to the top, so that there is space to pull on the top until the corners are installed diagonally. At this time, the cloth cover can be pulled down, so that the wardrobe is installed.
A must for the builder or window installer. take standard size silicone cartridges & makes applying large amounts of silicone a simple and easy job. Get the job done quickly and efficiently with the concentric metal Caulking Gun.
It is well suited for repairs and home-improvement projects. This non-drip caulking gun has a place to safely cut the spout to the desired size. It is effective for sealing windows, cracks and more to create a barrier from the elements. This metal caulking gun is easy to use for both indoor and outdoor applications.
Metal Caulking Gun,Power Silicone Gun,Aluminium Caulking Gun,Professional Sealant Gun
jiangsu concentric internatinal ltd , https://www.jsconcentriccorp.com