The qualified vials are packaged and stored in the warehouse after they are marked with the trademark, specifications, production date, production unit and address.
In general, the injection-blow hollow vial production line must be equipped with corresponding auxiliary facilities and operation management personnel in addition to the technical, equipment, and process conditions. Such as power, factories, operators, etc., the main parameters are shown in the table.
Important parameters related to the production line
Normally, the main body of injection-blowing hollow bottle production line should be placed on the preset foundation, or it can be installed on the shock absorber used in general machinery. At the same time, it is necessary to adjust the level of the host machine. It is possible to use the work surface of the host machine and the working surface of the injection device as a benchmark. Only the vertical and horizontal levels of the machine are checked with the level, and the horizontality is 0.1/1000 mm.
Other auxiliary machines should also be placed on the preset foundation. In preparation for the foundation of the foundation, a pipeline transportation ditch should be arranged for the auxiliary installation of cables, water pipes, air pipes, etc. The compressed air purification device can be placed outside the purification plant. The connecting cooling water and compressed air piping must have a sufficiently large cross-section to reduce transmission losses.
Before using the machine, the operator must choose familiar with the structure of the machine, the principle of the hydraulic system, the principle of pneumatics, the principle of electrical control, and the functions of various switches and buttons. At the same time, check whether the water, electricity and gas are connected and whether they are connected correctly. Then you can do it.
First, manually: Set the temperature, time and position of the machine by hand, and set the pressure and speed of all actions. Then semi-automatic operation: close the safety door, start from the lowering of the turntable, until the turntable rises, turn, and complete a semi-automatic cycle program. After a cycle is over, press the auto button again to restart the machine for the next cycle. Finally, automatic operation: After semi-automatic operation, other operation procedures are unchanged, the selection switch is set to the automatic position, and the automatic opening button is pressed, and the machine automatically completes the process and each action according to the selected program continuously and continuously. In the normal production conditions, the machine is running in the fully automatic state, or to stop the machine running, press the auto stop button, the machine will automatically stop to the cycle start position after completing this cycle automatically. If an emergency occurs, press the emergency stop button and the machine will stop momentarily.
Our Wood-Free Paper Bag can be sized to fit your product with your specifications.
All paper bags can be customized with your logo and brand color.
Your packaging does so much more than just hold and protect your product; it makes consumers aware of your company and brand. Creating a look that is custom fit and tailored to your specifications is essential for your brand`s shelf appeal.
Wood-Free Paper Bag
Wood-Free Paper Bag,Free Paper Bag,Wood Paper Bag,Plain Wood-Free Paper Bag
Shenzhen Haotuanyuan International Trading Co.,Ltd , https://www.luxurypaperbox.com