Decoration must know eight kinds of plates

According to the material classification, the plates can be divided into solid wood panels and wood-based panels. According to the molding classification, they can be divided into solid panels, plywood, fiberboard, panels, fireproof panels and so on.

1, solid wood board

As the name suggests, solid wood panels are wood panels made from complete wood. These plates are sturdy and durable, and the texture is natural. However, due to the high cost of such panels and the high technical requirements, there are not many uses in the decoration. Solid wood boards are generally classified according to the physical name of the board, and there is no uniform standard specification. At present, in addition to the use of solid wood panels for floors and door fans, the panels we use are generally artificially machined panels.

2, splint

The splint, also known as plywood, is commonly known as a thin core board. It is made of three or more layers of one millimeter thick veneer or sheet adhesive. It is currently the most commonly used material for hand-made. The splint is generally divided into three specifications of 3 PCT, 5 PCT, 9 PCT, 12 PCT, 15 PCT and 18 PCT (1 PCT is 1 mm).

3, decorative panel

Decorative panel, commonly known as the panel. It is a decorative board with a single-sided decorative effect, which is made by cutting the solid wood board into a thin veneer with a thickness of about 0.2 mm and using a splint as a base material. It is a special way of splinting and has a thickness of 3 centimeters.

4, blockboard

Blockboard, commonly known as large core board. The large core board is made up of two sheets of veneers bonded together in the middle. The price of the large core board is cheaper than that of the thin core board, and the vertical direction (differentiated by the core material direction) is inferior in bending strength, but the lateral bending strength is high.

5, particle board

Particleboard is a thin sheet made of wood scrap as the main raw material, then added with glue, and the additive is pressed. According to the pressing method, it can be divided into two types: extruded particle board and flat particle board. The main advantage of this type of sheet is that it is extremely cheap. The disadvantages are also obvious: the strength is extremely poor. It is generally not suitable for making larger or mechanically demanding furniture.

6, MDF

MDF, also known as fiberboard. It is made of wood fiber or other plant fiber, and the artificial board made of urea-formaldehyde resin or other suitable adhesive is divided into high-density board, medium-density board and low-density board according to its density. MDF is also easy to rework due to its soft and impact resistant properties. In foreign countries, MDF is a good way to make furniture, but because the national standards for height plates are several times lower than international standards, the quality of MDF use in China needs to be improved.

7, fire board

The fireproof board is a decorative board made of a silicon material or a calcium material as a main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, binders and chemical additives, and subjected to autoclaving technology. It is a new type of material that is being used more and more, and its use is not only due to fire prevention. The construction of fireproof board has higher requirements for sticking glue, and the price of fireproof board with better quality is more expensive than decorative panel. The thickness of the fireproof board is generally 0.8 mm, 1 mm and 1.2 mm.

8, melamine board

The melamine board, the full name is a melamine impregnated film paper veneer wood-based panel, is a wall decoration material. The manufacturing process is to put paper with different colors or textures into a melamine resin adhesive, and then dry to a certain degree of solidification, and lay it on the surface of particleboard, medium density fiberboard or hard fiberboard, and hot pressed. Decorative plates.

Jia Teng Glassware is made of borosilicate glass and it is mainly exported to the United States and many European countries. With high quality and nice looking, it got good feedback from the world market. It can be widely used for many soft drinklings, like juice, soda and any other beverage you like.


JIATENG GLASS is an experienced innovator in the design, manufacture and supply of high-quality borosilicate glassware. Located in the [China Glassware Hometown", Hejian city of Hebei province, we produce a complete line of borosilicate glass products, including Double/Single Wall Glass Cup, Teapot, Wine Bottle,  Glass Jar , Water  carafe, French press, Water Bottle, Glass Dome , Decanter, Candlesticks, etc. All products are made of high borosilicate glass without BPA, Lead & Mercury and purely hand-blown. It can withstand a wide range of temperature from-30℃to 530℃ without changing its shape or cracking. 


Qualified with ISO9001, LFGB and SGS certificates, our products have been exported to over 20 countries, mainly in Europe, North America, East Asia, The Middle East and Southeast Asia. 

 

JIATENG GLASS are created with simplicity in mind, using environmental material in the design to increase the quality of people's lives. We look forward to continuing our commitment to excellence and innovation for our customers for many more years to come!

Soft Drinking

Soft Drinking,Drinking Carafe,Glass Bottle,Glass Dispenser

Hejian Jia Teng Glass Products Co., Ltd. , http://www.jtglassware.com