The skill of selecting multi-layer parquet, the appearance is not uniform is the natural performance
To choose a solid wood composite floor, the first thing to look at is the quality of the appearance. It depends on whether the color and texture of the surface wood meet the grade standard. Generally, there should be no wood defects such as decay, dead knots, knot holes, wormholes, resin capsules, cracks or cracks, and the texture of wood texture and color should be harmonious. While looking at the appearance, you should also see if the tongue and the groove around the floor are flat.
The existence of color difference of multi-layer solid wood composite flooring is due to the different natural environment of wood growth, which is caused by different sunshine. Producers can only make them as uniform as possible with the help of modern technology. In fact, only the surface of artificial materials can avoid chromatic aberration. The production of (such as laminate flooring), while the multi-layer parquet has a slight color difference, but more fully demonstrate the natural effect of pure wood flooring.
The rough feeling of the concave and convex notch is the design feature of the multi-layer solid wood composite floor. It adopts this deliberate raw edge design, and the glue effect of the floor is good during the sizing paving process, so that the uneven groove between the plates The bite will be closer and the plate separation will not be easy, which will make the laying effect more integrated.
The skin is so thin, is it easy to be worn?
For multi-layer parquet, the wear resistance often does not depend on the thickness of the skin. The decisive factor is the coating covering the outermost surface of the floor. When purchasing multi-layer parquet, you should pay more attention to the paint quality of the floor panel. The specific method is: the floor panel is obliquely placed in a bright place, and the paint film is full and uniform from the end surface of the board, and there is no wave shape indentation. The paint should be evenly coated, without bubbles, small white spots, etc., and the surface should not have obvious stains and damage.
At present, the surface of the multi-layer solid wood composite floor on the market is mostly made of the new UV acrylic paint of the United States, six-eight times of roller coating, three times of ultraviolet curing, and secondary planing. The paint can penetrate into the surface of the table to the maximum extent. There will be no falling off. This new type of UV acrylic paint has the characteristics of good environmental performance, wear resistance, flame retardancy and high transparency compared with ordinary PU paint. It can resist chemical attack and will not be used for a long time. Turn yellow. At the same time, the roller paint will be warmer than the lacquer, and there will be no cold feeling.
Because the multi-layer parquet has such excellent surface technology treatment, although its surface is thin, its wear resistance has been tested by the National Wood-based Panel Quality Supervision and Inspection Center, and the wear resistance value is twice that of the national standard.
For weatherproofing/storage of pallet loads, or just for protection against dust, we can design the Top Sheet Dispenser to work with automatic Turntable wrapping system or rotary arm wrapping system. The dispenser spreads top sheets after pallet load is discharged from the Palletizer and enters the Top Sheet Dispenser. After covering the top sheet, the load is wrapped up so that it can be delivered to customer or storage room. The top sheet will protect the load from moisture and dirt.
Sheet Dispenser,Top Film Dispenser,Automatic Sheet Dispenser,Top Sheet Dispenser
Shandong Sinolion Machinery Corp., Ltd. , https://www.sinolion.cc