Programmable xenon lamp weathering test box needs to pay attention to the following seven points during the transportation process:
The programmable xenon lamp weatherproof test box itself is equipped with a universal caster. If the equipment is placed directly on the first floor, use a manual hydraulic forklift to directly remove it and push it back to the laboratory. The width and height of the elevator and the aisles, corridors, and doors that must be passed into the test room can be entered smoothly. If there is no elevator to be manually transported, special care should be taken.
If the weatherproof test box of the programmable xenon lamp must be manually moved upstairs due to site problems, the following points need special attention:
1. The standard size of the programmable xenon lamp weathering test box is divided into five types: 80, 150, 225, 504, 800, and 010. The low temperature range is 0, -20, -40, -60, -70, -80. It is stated that when the size of the test box exceeds 504 liters and the temperature range exceeds -60 degrees, we do not recommend the use of handling, because the weight and volume are too large, it may cause damage to personnel and machines and major safety hazards, you can use a crane, replace Place the venue or change the size.
2. If the test box is within the range of transportation, the manufacturer recommends to find a professional moving company and a manufacturer's technician to provide on-site guidance, complete tools, sufficient space at the entrance of the corridor and the average strength of the transportation personnel. Guided to move correctly.
3. Because the programmable xenon lamp weathering test box is cooled by compressor refrigerant, it must not be tilted during the transportation process (such as the tilt angle cannot exceed 15 degrees in special cases). It should be moved vertically and parallelly like the air conditioner to avoid the leakage of Freon Refrigeration.
4. The outer bladder of the programmable xenon lamp weatherproof test box is made of steel plate anti-static spray plastic treatment, and the related parts are made of stainless steel. If the paint is dropped, the entire test chamber shell needs to be re-sprayed, which is very expensive.) If it is filled separately, it will still affect the appearance.
5. The hinge of the gate needs to be taken care of to avoid the door sag or unstable center of gravity caused by loosening.
6. If it is a programmable xenon lamp weatherproof test box with humidity, the waterproof cup is broken.
7. Handling is a measure with significant safety hazards. It is not recommended to adopt it in special circumstances. When selecting the volume, temperature range, and test function of the test box, the user should not only consider the function that the tested sample needs to realize, but also All-round consideration is given to whether forklifts, elevators, aisles, corridors, doors, windows and other facilities can allow the programmable xenon lamp weathering test box to be put into the designated test area without obstruction.
Dongguan Aisili Testing Instrument Co., Ltd. specializes in the development and production of ultraviolet aging test machine, ultraviolet weathering test machine, xenon lamp aging test machine, xenon lamp weathering test machine. Order ultraviolet aging test machine, programmable xenon lamp weathering test box, UV1 ultraviolet light acceleration Aging box, ultraviolet weathering test machine, xenon lamp aging test machine, UV ultraviolet weathering test box, xenon lamp weathering test machine, please call the service hotline
Handle Grip,Grill Rack,Grill Rectangle,Square Basket
YRX Technology (Shenzhen) Co., Ltd. , https://www.yrx-tech.com