Refractive printing is a new printing process that emerged in the early 80s of the last century. Can make the surface of the printed product has a novel and unique metal mirror refractive effect. The refraction printing is produced by the imprinting method. According to the diffusion principle of light, the printed product reflects the change of light from multiple angles, and makes full use of the surface state of the paper, so that it contributes to the diffuse reflection of light and achieves a better refraction effect. On the basis of the refraction, we can design concrete or abstract patterns according to the stereoscopic perspective, and apply a variety of diffractive lines in a comprehensive manner to make the picture produce a hierarchical stereoscopic image. The process of imprinting on metallic paper can make the product dazzling, gorgeous in color and strong in three-dimensional.
The technological practice of the diffractive printing is: First, according to design requirements, a regular geometric line texture pattern is selected as a refractive index pattern, which is generally a combination of straight lines or curves, and is not suitable for selecting thicker or thinner lines. Generally speaking, the ratio of solid line and blank line is l:l, and the block pattern or gap is too large or too small, and the distribution lacks regularity. Practice has proved that it is not able to produce refractive effects, and it should not be used as a dioptric pattern. Then, an imprinting plate is manufactured, and according to the size of the light pattern area and the required unit pressure, an appropriate die-cutting creasing machine or a press having a certain pressure is used to perform cold-press molding. It should be pointed out that the selection of embossed plates should be based on copper plates, because the fineness and resistance of copper plates are much better than that of zinc plates. In the dioptric printing process, the choice of printing materials is very important, and it plays a key role in the refraction effect of printed products. Practice has proved that the more metallic luster the selected substrate has, the better the smoothness, and the greater the reflection coefficient to light, the better the refractive effect.
In general, a large area of ​​printed silver and gold printed products can produce a refractive effect. However, the use of a smooth metal paperboard, anodized aluminum material works best.
Desktop charging station should be kept in a dry and ventilated place, with plenty of space around it, and the vent and air inlet should not be blocked to ensure safe work. It can be placed on the office platform, so that it can easily take the multi-layer to meet the demand of different figures. The charging station can not be inverted. It will inference work and charging station is not safe. And Desktop charging station include as follow details:
1. Free combination according to requirements;
2. New switch hinge, cabinet door switch easily and easily;
3. Simple number jack, convenient and quick access to data;
4. High quality locks, easy to open and flexible;
5. New hands, beautiful and stylish;
6. Drawer slides, easy and smooth;
7. Layer board can move, better make full use of cabinet space.
Our Storage charging cart can charge and manage for different electronic devices. We can design the suitable storage charging cart according to the size and power parameters of your electronic equipment. Not only can you arrange and store lots of electronic equipment, but also can charge in the same time. Generally there are multiple charging interfaces: 5-10 units, can be depended on the customer's need to customize and satisfy the different number of charging interfaces, like OEM, ODM. Universal charging solution can be used in any country. All of charging solution have multiple USB port and AC charging interface.
We have intelligent Storage Charging Cart. It can do intelligent disinfection, timing, control switch and synchronous data functions.
This intelligent function can be choose by your inquiry.
1.When electric equipment put in the charging cart, we can choose to disinfection for the equipment. It uses UV sterilizer to kill bacteria. Keep your health.
2.About charging time, you can set up with timer early, as long as press the open switch, the charging cart will automatically control and charge your equipment.
3.If you need to transfer data files to charging device, connecting to the data transmission port directly with your computer, and operate synchronous transmission function. This function is only with USB port charging cart.
Charging station this product is used for school education, library, hotel, office, factory, meeting room, family, shops, airports, data processing and government work scenario, these places are using a lot of tablets and laptops. Charging stations will work for their collective charge and management. Our products main sold to education place.
Security Tablets Charging Cart is equipped with LED light to display charging status, red light means charging, green light means full charging or not charging. And we have three point safety locker.
Two with brake casters can make charging cart not move when you put well it on a place.
Our charging cart is made of 1.2 mm cold steel sheet material. It is really strong and can understand certain weight. The good quality can be seen.
USB charging cabinet have safety certification of UL, CE, ROHS,CCC, FCC and REACH, considering the safety and quality assurance. Design two side door to protect power area and curved edge surface to preventing user getting hurt and device. Can be fixed on the wall. Let customer use happy and at ease.
Product certification is complete, safe and reliable, good quality. Looking forward to you cooperation!
Charging Cabinet For Tablet,Smart Tablet Charging Station,Public Charging Cabinet
Shenzhen Qipeng Maoye Electronic Co.,LTD , http://www.lotcharge.com