6. In 2002, Beijing Pretex Electronics Co., Ltd. built a roll-type PS plate production line with a speed of 6 to 8 meters per minute in Changge City, Henan Province. The company also plans to build a 15m/min PS plate production line in the Economic and Technological Development Zone of Langfang, Hebei Province, and is expected to start production in the first half of this year. Pratt has started from the production of recycled PS plates for many years, and promoted the recycling technology throughout the country. Now it is gradually developing its production lines and CTP plate production through technological development.
7. In 2002, a reel-type PS plate production line with a speed of 10-15 m/min was established in Shanghai Zijia First Plant and Zhejiang Yuyao City. Wang Yuwen, the general manager in charge of this design and manufacturing, stated that there are roughly 4 to 5 production line orders each year. This information indicates that the climax of the preparation of a new production line is still continuing. For these two production facilities, the Shanghai Zimo No. 1 Plant not only can produce the PS version, but also reserves the CTP version of the equipment space. Currently, it is working with related organizations to conduct CTP plate material research.
8. Wenzhou Kangerda Printing Equipment Co., Ltd. started construction of the third reel-type PS plate production line in 2002 with a speed of 10 to 15 m/min. It is expected to be completed and put into operation in the first half of 2003. According to the company’s introduction, the current production and sales situation is very good, and the supply of products is in short supply. According to this situation, a new production line needs to be added every year to meet the demand.
9. At present, most PS-based companies are planning to build a new PS version of the production line to expand production and enhance their competitive advantage. Such as: text sixty-five factories, Beijing China and India Xinhua Printing Equipment Co., Ltd., Sichuan Juguang Printing Equipment Co., Ltd., Pingyi (Sanhe) Printing Technology Co., Ltd., etc., the production speed of these companies' production lines are generally 10 meters/minute. Above, some manufacturers will also import advanced foreign equipment to improve their technical level.
X. It was proposed by the Printing Materials Branch of the China Printing Industry Association that the revision of the positive version of the PS version of the Yangtse Institute of Printing Science and Technology and the Second Film Factory will last for two years. The approval draft will be completed by the end of 2002 and reported to the relevant unit. Approval. Yang Tu PS version standard is the industry standard for the first time in 1989. Since it was published, it has played a very good role in the PS version production technology and the use of technology, and has promoted the continuous improvement of the PS version product quality in China. According to the relevant provisions of the standardization work, the standards should be reviewed or revised every five years. The PS version is an emerging industry with rapid technological development. In order to reflect the advanced nature and practicality of the standard, the positive PS version was revised in 1995. This is the second revision. The revision of this standard mainly increased the detection of the photographic performance of the PS plate, such as the examination of the exposure amount of the plate, the determination of the film retention rate of the printing plate, and the like. The provisions of these new indicators will promote the quality of PS plates in the future, especially the development of CTP plates.
From the above ten major information, we can see that China's PS industry is in an unprecedented period of vigorous development. This is a good thing. The expansion of production scale, the application of new technology and the improvement of product quality are the only way for the development of modern enterprises. At this rate, the annual output of the PS plate in China will soon reach 100 million square meters. Although China's sales market has a net increase of more than 15% each year, the situation of oversupply is still inevitable. For this reason, the author proposes two opinions for the reference of the insider.
First, while focusing on the domestic market, we should actively explore the international market. At the same time, in the international market competition should not only consider the price factor, we must emphasize the improvement of quality, increase variety, increase brand awareness, and win with credibility. At present, the export prices of some companies are extremely low, and they respond to the international market with products of low quality and low price, which both upset the price of export products and damage the image of the domestic PS version.
The second is to start from the actual situation when expanding the scale of the company, that is, starting from its own technical strength, talent strength, and the degree of development of new products. For now, without the support of CTP technology, it is difficult to maintain a long-term competitive advantage. Of course, the economic strength is the basis for the development of enterprises, and some of the production lines have no funds to buy aluminum after the completion of the production line, resulting in the lack of start-up is difficult to develop. In short, the development of enterprises must not only be far-sighted but also require facts to be pursued. (Finish)
7. In 2002, a reel-type PS plate production line with a speed of 10-15 m/min was established in Shanghai Zijia First Plant and Zhejiang Yuyao City. Wang Yuwen, the general manager in charge of this design and manufacturing, stated that there are roughly 4 to 5 production line orders each year. This information indicates that the climax of the preparation of a new production line is still continuing. For these two production facilities, the Shanghai Zimo No. 1 Plant not only can produce the PS version, but also reserves the CTP version of the equipment space. Currently, it is working with related organizations to conduct CTP plate material research.
8. Wenzhou Kangerda Printing Equipment Co., Ltd. started construction of the third reel-type PS plate production line in 2002 with a speed of 10 to 15 m/min. It is expected to be completed and put into operation in the first half of 2003. According to the company’s introduction, the current production and sales situation is very good, and the supply of products is in short supply. According to this situation, a new production line needs to be added every year to meet the demand.
9. At present, most PS-based companies are planning to build a new PS version of the production line to expand production and enhance their competitive advantage. Such as: text sixty-five factories, Beijing China and India Xinhua Printing Equipment Co., Ltd., Sichuan Juguang Printing Equipment Co., Ltd., Pingyi (Sanhe) Printing Technology Co., Ltd., etc., the production speed of these companies' production lines are generally 10 meters/minute. Above, some manufacturers will also import advanced foreign equipment to improve their technical level.
X. It was proposed by the Printing Materials Branch of the China Printing Industry Association that the revision of the positive version of the PS version of the Yangtse Institute of Printing Science and Technology and the Second Film Factory will last for two years. The approval draft will be completed by the end of 2002 and reported to the relevant unit. Approval. Yang Tu PS version standard is the industry standard for the first time in 1989. Since it was published, it has played a very good role in the PS version production technology and the use of technology, and has promoted the continuous improvement of the PS version product quality in China. According to the relevant provisions of the standardization work, the standards should be reviewed or revised every five years. The PS version is an emerging industry with rapid technological development. In order to reflect the advanced nature and practicality of the standard, the positive PS version was revised in 1995. This is the second revision. The revision of this standard mainly increased the detection of the photographic performance of the PS plate, such as the examination of the exposure amount of the plate, the determination of the film retention rate of the printing plate, and the like. The provisions of these new indicators will promote the quality of PS plates in the future, especially the development of CTP plates.
From the above ten major information, we can see that China's PS industry is in an unprecedented period of vigorous development. This is a good thing. The expansion of production scale, the application of new technology and the improvement of product quality are the only way for the development of modern enterprises. At this rate, the annual output of the PS plate in China will soon reach 100 million square meters. Although China's sales market has a net increase of more than 15% each year, the situation of oversupply is still inevitable. For this reason, the author proposes two opinions for the reference of the insider.
First, while focusing on the domestic market, we should actively explore the international market. At the same time, in the international market competition should not only consider the price factor, we must emphasize the improvement of quality, increase variety, increase brand awareness, and win with credibility. At present, the export prices of some companies are extremely low, and they respond to the international market with products of low quality and low price, which both upset the price of export products and damage the image of the domestic PS version.
The second is to start from the actual situation when expanding the scale of the company, that is, starting from its own technical strength, talent strength, and the degree of development of new products. For now, without the support of CTP technology, it is difficult to maintain a long-term competitive advantage. Of course, the economic strength is the basis for the development of enterprises, and some of the production lines have no funds to buy aluminum after the completion of the production line, resulting in the lack of start-up is difficult to develop. In short, the development of enterprises must not only be far-sighted but also require facts to be pursued. (Finish)
Kick Scooter,Frog Scooter,Skateboard Scooter
Baby Potty,Baby Walker Co., Ltd. , http://www.nsbabyproducts.com