[ China Wardrobe ] There are many consumers who do not know whether to choose a concave or convex rail when purchasing a wardrobe sliding door. Which one is better for the concave and convex rails? Consumers have the following two points:
Viewpoint 1: Think that the convex rail is good
“The performance of the convex rail is obviously higher than that of the concave rail. The concave rail is easy to accumulate dust and is difficult to clean. If there is foreign matter entering, it is easy to jump. However, the convex rail is very good to avoid these situations, so the convex rail is designed. It is better than the concave track science."
Viewpoint 2: Think that the concave rail is good
"Because, if a convex groove is used, the concave wheel is used on the door. Because of the frequent force, the concave wheel is more likely to widen, causing the concave groove of the concave groove to be not tightly coupled, resulting in a trick. Will shake, shorten the service life! This is the disadvantage of using the convex groove! In addition, the groove can also be installed with a positioner, which is very convenient for the consumer, because it can position the card in the best position, which can make the door stick On both sides of the mullion, otherwise there will be gaps, and it is easy to get dust in the closet!"
Sliding door wardrobe is currently the most common custom wardrobe in the home decoration, and the sliding door is durable and goodfeel, depending on the use of the rail, because the sliding door is the most prone to problems, or in the rail The pulley part, common problems are sliding door jumping, sliding and not smooth. Therefore, this netizen is concerned about the problem of the concave or convex rail of the sliding door. It is indeed necessary. In order to let netizens have a clear understanding of the sliding door slides, this issue of "Wardrobes Encyclopedia" will continue to move out, enter the enterprise and consumers, and answer for everyone.
First, let's take a look at the construction of the convex and concave rails of the sliding door rail.
The concave rail, as the name implies, is the concave rail of the concave design.
As can be seen from the figure, the narrow groove pointed by the arrow is smaller than the average person's little finger. As it is said on the Internet, it is easy to accumulate dust and it seems not clean. In addition, once the groove is deformed or defective, it is easy to cause the sliding door to be inconvenient, so it is necessary to carefully check whether the track is smooth after the construction of the worker.
Convex rail, rail track with convex design
The design of the grooved slide rail corresponds to the use of the concave wheel for bearing and moving. In theory, the number of times of use is more likely that the pulley is easily worn, and the movement is not smooth or jumps.
Therefore, the material of the pulley is also very important. Currently, there are two kinds of plastic pulleys and glass fiber pulleys on the market. The plastic pulley has a hard texture, but it will be bun, hard and unable to slide for a long time; the fiberglass has good toughness and wear resistance, and the sliding is smooth. There are also a few use of metal pulleys, which are very strong, but produce noise when in contact with the track; be sure to choose carefully. The sliding door pulley is generally required to be able to push and pull more than 60,000 times, and the brand wardrobe can reach more than 100,000 times.
The convex rail concave wheel is often designed with anti-jumping device to ensure that the sliding door is safe and does not derail when sliding. In addition, considering that the shape of the convex rail is easily deformed by the collision of hard objects, the convex rail is often solidly designed.
Xiaobian Comments: From the above analysis, Xiaobian thinks that the sliding door rails are concave or convex or convex rails have their own advantages and disadvantages. When purchasing, pay attention to the following two points:
1. When purchasing the convex rail sliding door, understand whether the convex rail is solid design, whether the positioning device can be installed on the sliding rail, whether the pulley and the sliding rail are added with the anti-jump device, what materials are used for the pulley, try not to buy The sliding door of the groove convex rail.
2. When purchasing the concave rail sliding door, test whether the sliding of the sliding door is smooth, whether the combination of the pulley and the sliding rail is tight, and the sliding door can be gently shaken when selecting. If the degree of the door shaking is smaller, the stability is more it is good. When shaking, pay attention to the upper pulley and the upper rail. The gap of the good quality sliding door is almost zero, so that there is no vibration feeling when sliding, smooth and smooth.
Baby Changing Bag Backpack,Fashionable Baby Changing Bags,Black Changing Bag,Fashionable Changing Bag
JOYBABIES PRODUCT CO.,LTD. , https://www.my-joybabies.com