Automatic stencil machine detailed operation steps

an examination:

* First of all, check whether the electrical parts fall off and whether the external power supply is ~220v.

*Before starting the machine, make sure whether there is syrup or water in the tank. Waterless start will burn the heater and circulating motor.

* Roller. Whether the water spray pipe is positioned or not, and whether the drying fan protection net is covered.

Boot:

Press the on/of button once, the indicator light is on to indicate that it is ready to be flushed, and the temperature of the developer will automatically rise to the set temperature after the power is turned on. At this time, the circulation system starts to operate; if the actual liquid temperature has reached the set temperature When the temperature exceeds the set temperature, the recirculating water jet system will not move and will be in a static state.

Shutdown:

Press the on/of button to turn off the indicator light, and then turn off the sprinkler system after shutting down. The drying system drive system stops.

Entrance:

Need to develop the PS version from the entrance;

No need to develop the PS version from the b entrance;

Glue or not can be controlled by the red switch on the panel, i for glue, o for glue.

Reading of data:

Display temperature: press the button of the development temperature once to read the development temperature. At this time, the number displayed on the display is not blinking, that is the actual temperature of the syrup. Then press the temperature display button again, and the number displayed on the display is blinking. , which is the user's set temperature.

Bake temperature: just like the temperature, press this key once, when the word is not flashing, it is the actual drying temperature; when you press it again, the word flashes, which indicates the temperature required by the user.

Version: Press this button once to display the number of sheets that have been punched on the display. If you want to return to zero, press this button once and then press it three times quickly. The version number will be zero.

Speed: Press this button once, the flashing number on the display is the user's setting speed, the number is 20~40 adjustable, 20 is the fastest, and 40 is the slowest. Press this button once, and then press fast three times. The displayed flashing number is the flow set by the user, that is, the time when the plate is completely left to leave the plate, and if the plate is not completely out of the machine. If it stops, it means that the user setting process is too short. If the stencil has been completely left for a long time, but the machine is still running, the flow setting is too long.

Supplement: Press this button once, the displayed flashing number is the user's setting for each pot to automatically replenish the potion unit. Flashing digital users can increase or decrease as required. Press three times in succession, ie manually The supplement, the motor is ready to add the potion.

Reverse: Press this key once to stop the ongoing process. Just like reset, if you continue to press for five seconds, it will come back.

Changes to the data:

Change the temperature: Press the temperature key to display the number flashing, then press + or - to display the number that changes with the user's needs, if you press the accelerator key and + or - key, the change in the displayed number, that is, multiples of Change to achieve rapid change.

Change the baking temperature, speed, flow, and other methods are the same as the temperature display, the same operation method.