SX2 series muffle furnace can repair the defects such as elongation, necking, thickness reduction, section deformation, bending and bulging caused by high temperature creep. To this end, the muffle furnace tube is first fully measured prior to repair to determine the repair process and the acceptance criteria after repair.
Next, the defect is removed and then welded. Stainless steel muffle furnace product analysis and technical improvement, stainless steel with bright annealing large production line, its total height is 55m, can handle stainless steel strip with width of 600 ~ 1250mm, thickness of 0.1 ~ 3.0mm, the important accessory is muffle furnace Handle stainless steel.
The muffle furnace cycle operation type is used for laboratory analysis, industrial and mining enterprises, scientific research units for elemental analysis and determination, and general small steel parts for quenching, annealing, tempering and other heat treatment. The high temperature Mafu furnace can also be used for sintering and dissolving metal and ceramics. , analysis and other high temperature heating.
How to check if the muffle does not heat up?
1. After the muffle furnace is naturally cooled to the normal temperature state, close the main power supply, turn on the temperature control switch, and observe whether the temperature meter display is normal. Red light, green light conversion is normal, if everything is normal, it means there is no problem with the temperature controller, otherwise it is still.
2. Turn off the main power supply and temperature control switch, use a multimeter to detect the terminal behind the muffle furnace, measure whether the resistance value is normal, the resistance is infinitely large, indicating that the open circuit, the electric furnace wire is blown, and the resistance deviates from the rated value, indicating that the electric furnace wire is seriously oxidized.
3. Detect whether the various terminals are fully linked, and open the controller to measure whether the contacts of the AC contactor can be reliably sucked.
Bowl chopper and vacuum mixer are widely used in sausage production line,including bowl cutter,bowl chopper,meat mixer,vacuum bowl cutter,vacuum cutter,vacuum mixer. Only the excellent performance machines can guarantee the high quality of products. 30 years of experience allows us to design the most advanced chopping and mixing machines. Vacuum sealing technology is applied in these machines preventing protein and fat being oxygenized and damaged, keeping freshness, original color and taste, reducing air bubbles and enhancing flexibility.
The vacuum mixer adopts double shaft and helix paddle structure, which will mix raw material in circle movement, to reach the perfect mixing effect.
Bowl cutter can cut meat into emulsified paste by high speed chopping knives and mix up other additives into meat sufficiently.
Bowl cutter series:
High speed bowl cutter 80L
High speed bowl cutter 125L
High speed bowl cutter 200L
High speed bowl cutter 330L
Vacuum bowl cutter 125L
Vacuum bowl cutter 200L
Mixer series
Common meat horizontal mixer 60L, 150L, 400L, 650L, 800L, 1200L
Vacuum meat horizontal mixer 60L, 150L, 300L, 650L, 800L, 1200L
The application of Chopper And Mixer Series
Raw sausage
Cooked sausage
Smoked sausage
Scalded sausage
Canned meat
Pies
Soups and sauces
And much more ...
Industrial Meat Mixer,Vacuum Meat Mixer,Chopper And Mixer Series,Bowl Cutter,Bowl Chopper,Meat Mixer,Vacuum Bowl Cutter,Vacuum Cutter,Vacuum Mixer
Helper Machinery Group Co., Ltd. , https://www.ihelpergroup.com